Clear Sky
“Sky speaker and interconnect hit a sweet spot in terms of price & performance. These cables reveal a level of realism and detail that one would usually spend a lot more to get. Don’t compare these to other cables at the same price point - listen to them in comparison to the high-end cables of other brands.”
-R. Coleman, Oakland, CA
Sky Interconnect
Performance: Transparent, dynamic, and neutral. Lowest priced interconnect using Matched Propagation technology. Excellent in long or short lengths. Suitable for any high-end system.
​
Standard Terminations: Cardas GRMO or Neutrik XLR.
​
Design/Construction: Conductors: Matched Propagation Kevlar core, Grade 1, 99.9999% pure oxygen free copper with SPN clear coat (Litz), gauge sizes scaled to Golden Ratio proportions. Braided cross-field layer geometry, insulated in advanced ultra thin
FEP tape wrapped jacket.
​
Geometry: Shielded twisted pair with non conductive poly-e air-tubes bound with advanced ultra thin FEP tape wrap. Outer layer uses compressed poly-e air-tubes to suspend the tin plated copper braided shield and extruded alcryn rubber outer jacket away from the conductors.
​
Gauge: 2x23.5 AWG
Outside Diameter: 0.365”/9.27mm
Sky X4 Speaker
Performance: Based on its big brother, Clear Cygnus speaker cable, the newly up- graded Clear Sky X4 now offers better resolution than the originalSky, and is more suitable for a wider range of speakers. Our new braided conductors allow reduced production time with minimal sacrifice of performance. The new X4 geometry also allows for internal bi-wire. Finished with Cardas custom printed shrink tubing instead of machined aluminum strain relief, and soldered con- nectors instead of compression die forged terminations, Clear Sky X4 brings serious performance to the most affordable end of the Clear cable line.
Standard Terminations: Soldered Cardas CGMS spades or CABD bananas.
​
Design/Construction: Braided Matched Propagation, fibrillated
polypropylene core, Grade 1, 99.9999% pure OFHC copper
with SPN clear coat (Litz), gauge sizes scaled to Golden Ratio proportions. Cross-field layer geometry, insulated in a low noise PTFE tape and Electro-Dissipative dielectric.
Geometry: Concentrically braided four conductor surrounded by anti- static coated fibrillated polypropylene fibers. Outside jacket is very flexible Alcryn Rubber.
​
Gauge: 4x15 AWG
Outside Diameter: 0.720”8.30mm