top of page

Spades

Description: Heavy duty spade milled from high purity billet copper. Fits 0.25”/6.3mm binding posts. Drilled solder hole to aid in termination. Has a slight angle of 13° for increased cable

clearance. Maximum width of 12mm/0.47”

Base metal: High Purity Copper

Plating: Silver/rhodium

This part requires solder. Click here to learn about Cardas Quad Eutectic Solder & Cardas Rosin Flux. Click here for our soldering how-to videos.

Termination hole options:

CGMS R XS (Part # 35.20) 7 AWG/4mm/0.157”

CGMS R M (Part # 35.34) 4 AWG/5.5mm/0.216”

CGMS R L (Part # 35.33) 2 AWG/6.90mm/0.271”

How To Solder To A CGMS Spade

CGMS6
CGMS Spade.png

Description: Heavy duty spade milled from high purity billet copper. Fits 0.35”/9mm binding posts. Drilled solder hole to aid in termination. Has a slight angle of 13° for increased cable clearance. Maximum width of 16.25mm/0.64”

Base metal: High Purity Copper

Plating: Silver/rhodium 

This part requires solder. Click here to learn about Cardas Quad Eutectic Solder & Cardas Rosin Flux. Click here for our soldering how-to videos.

Termination hole options:

CGMS 9R XS (Part # 35.29) 7 AWG/4mm/0.157”

CGMS 9R M (Part # 35.34) 4 AWG/5.5mm/0.216”

CGMS 9R L (Part # 35.33) 2 AWG/6.90mm/0.271”

How To Solder To A CGMS Spade

GRSU

Our universal spades fit both 6.35mm & 9mm binding posts.

Description: Stamped copper spade with solder tab to fit any size wire. Has a slight angle of 13° for increased cable clearance. Designed to fit large 9mm and standard 6mm binding posts.

 

Maximum width of 14.2mm/0.559”

Base metal: High Purity Copper

Plating: Silver/rhodium 

 

Termination: Solder tab

This part requires solder. Click here to learn about Cardas Quad Eutectic Solder & Cardas Rosin Flux. Click here for our soldering how-to videos.

Cardas Part Number: P35.71

GRS U.png
CCS8

Medium duty copper spade. Fits 9mm and 6mm binding posts. Designed to be crimped by hand but can also be soldered. Has a slight angle of 13* for increased cable clearance. Maximum width of 13.65mm/0.537”.  Fits both 6.35mm & 9mm binding posts.

Note: Crimping spades should not be used with Litz conductors. Cardas cables that are compatible with crimped connectors are 101 Speaker, and Crosslink Speaker.

Base metal: Copper
Plating: Silver/rhodium 

Termination: 8 AWG/3.54mm/0.139” Crimp

Cardas Part Number: P35.70

CCS 8.png
bottom of page